و يهدف هذا المقرر  إلى كيفية التعامل مع الطبيعة والاستفادة من الطاقة الكامنة فيها و هي الطاقة الموجودة خارج باطن الأرض و في باطن الأرض و التطبيقات العملية للحصول على الطاقة البديلة مثل نظام البئر الكندية لتبريد وتدفأة المنازل طبيعيا فقط بحرارة الأرض الثابتة على مدار السنة و مثل طريقة jean pain في تسخين المياه فقط بروث الحيوانات


و يهدف هذا المقرر إلى دراسة الآثار السلبية الناتجة عن أجهزة التكييف و التبريد على المستوى الصحي و المستوى الاقتصادي و بالتالي ايجاد المعايير اللازمة لأنظمة التكييف والتبريد والتدفئة من أجل الحفاظ على البيئة و التوفير في استهلاك الطاقة.

This course aims to study the negative effects of air conditioners and cooling on the level of health and economic level and thus create the necessary standards for air conditioning systems, cooling and heating in order to preserve the environment and save on energy consumption.


الهدف من المقرر أن يكون الطالب قادراً على أن يتعامل مع تطبيقات التبريد الخاصة بصناعة الثلج ومبردات المياه وأن يتعامل مع أعطال أجهزة التبريد المنزلية والتجارية ويقوم بفك الوحدات وتجميع مكوناتها وأن يقوم كذلك بشحنها بوسيط التبريد بعد الإصلاح أو الاستبدال مع اختبارها وتقييم الأداء لها وعمل الصيانة الدورية.

و يشمل هذا المقرر:

المجمدات:

الأحمال الحرارية المتنوعة لغرف التبريد وتحديد سعة التبريد المناسبة

حساب الأحمال الحرارية المكتسبة

دورات وحدات تسقيع المياه

دورات مبردات المياه

أداء وحدات صناعة الثلج

اختبار الدورة الميكانيكية للتبريد بعد التجميع 

أعطال وصيانة دوائر التبريد

Target due to the student should be able to deal with for the manufacture of ice and water coolers Cooling applications and deal with breakdowns for domestic and commercial refrigeration equipment and the PVC units and assembly of components and that is also shipped an intermediary cooling after the repair or replacement with the testing and evaluation of performance and its work routine maintenance.

And this decision include:

Freezers:

Thermal loads varied for cold rooms and determine the proper cooling capacity

Thermal loads acquired account

Units frizzed Bathrooms

Water coolers courses

Performance units ice industry

Testing of mechanical cooling after the session of the assembly

Breakdowns and maintenance of the cooling circuits.

 يشمل هذا المقرر:

منظومات التحكم فى وحدات التكييف

التحكم فى درجة الحرارة ونسبة الرطوبة

التحكم فى الهواء النقي

التحكم فى سعة وحدات تسقيع المياه المستخدمة فى التكييف المركزى

التحكم فى سعة ملفات التسخين التي تعمل بالماء الساخن

التحكم فى درجة حرارة الهواء باستخدام السخانات الكهربية

صمامات التحكم الثنائية والثلاثية

تطبيقات دوائر التحكم المستخدمة فى مجال تكييف الهواء


ويتطرق هذا المقرر إلى دراسة الخصائص المناخية للمنطقة المراد إنشاء المباني فيها و الوصول إلى النموذج السكني المناسب و الخروج ببعض المعالجات التصميمية المناخية المناسبة ، مفهوم المحاكاة و انواع البرامج المستخدمة في تقييم الأداء الحراري داخل فراغات المباني و عمل مقارنة للوصول إلى برنامج المحاكاة المناسب.

وضع بعض المعالجات التصميمية و المناخية للنموذج ودراسة تأثيرها على درجات الحرارة داخل الفراغات السكنية لوصول على الطريقة المثلى لتصميم المباني السكنية

آ – يتم تحديد نظام واحد أو أكثر من الأنظمة لنقل الحرارة للمشروع الهندسي المدروس وفقا للمعايير التي تحقق الغاية من المشروع بأعلى كفاءة ويكون محققا للشروط الاقتصادية الأفضل 

ب- يتوجب على النظام أو الأنظمة المختارة لنقل الحرارة أن تحقق مظهرا مقبولا من خارج البناء وداخله وتكون قادرة على التحمل متينة التأسيس سهلة الاستعمال تتجاوب مع متطلبات الحمل محققة للغاية الأساسية منها ضمن الشروط المحددة والمعطيات الحقيقية 

ج – يستخدم نظام واحد أو أكثر من الأنظمة التالية لنقل الحرارة في المشروع الهندسي - نظام نقل الحرارة بالهواء

- نظام نقل الحرارة بالسوائل 

- نظام نقل الحرارة بوسائط التبريد (الإيزوروبية وغير الإيزوتروبية )

- نظام نقل الحرارة بالبخار 

- نظام نقل الحرارة بالأشعة 

د – يتم تحديد الشروط ا لجغرافية والمناخية السائدة للمشروع وذلك استنادا إلى معلومات السكان والمواصفات الوطنية واعتماد الشروط المناخية السائدة (الشروط الخارجية

درجة الحرارة – اتجاه الرياح وسرعتها –شدة الأشعاع الشمسي التغطية – الرطوبة النسبية ه – التعرف عى البناء واستخدامه الوظيفي وتحديد الشروط الداخلية (درجة الحرارة – الرطوبة النسبية – نقاوة الهواء وتوزيعه – مستوى الضجيج – ونوع الضغط ) بما يتناسب الأستخدام الوظيفي لكل حيز من كل بناء من أبنية المشروع ولكل وقت حسب الحاجة.


This touches course is to study climatic characteristics of the region to be the construction of buildings in and access to appropriate housing model and come up with some appropriate processor design climate, the concept of simulation and types of software used in thermal performance evaluation within the spaces of buildings and work compared to a proper simulation program.

Put some design and climatic processors to model and study their impact on the temperatures inside the residential spaces for the arrival on the best way to design residential buildings

A - is determined by one or more system of regulations for the transfer of heat to the project studied engineering in accordance with standards that achieve the purpose of the project is the highest efficiency and achieving better economic conditions

(B) should be selected on the system or systems for the transfer of heat to achieve acceptable appearance from outside the building and inside it and be able to a solid foundation endurance easy to use pregnancy respond to the requirements of achieving the most basic of them within the specified conditions and the real data

C - uses a single system or more of the following systems for heat transfer in the engineering project - air heat transfer system

- Heat transfer fluid system

- Modes of heat transfer cooling system (Alaazorobih and non Alaazutrobah)

- Steam heat transfer system

- Heat Transfer System X

D - is determined by the terms of the geographical and climatic situation of the project and based on national standards and the adoption of climatic conditions prevailing population information (external conditions

Temperature - wind direction and speed -iensity solar radiation coverage - relative humidity e - Ay construction identify career and used in determining the internal conditions (temperature - Relative humidity - the purity of the air and its distribution - the noise level - and the type of pressure) in proportion to the functional use of each space of each building buildings of the project and each time by Need.